UPVC Door Lock Replacement
UPVC doors are an effective security measure against burglaries. However, they do have a few limitations, but these can be overcome by installing a deadlock.
It's time to replace the barrel lock if your uPVC door lock feels a bit loose. This simple DIY project can enhance the security of your home and improve its appearance.
Removing the old lock cylinder
If you're experiencing that your front door feels weak when you lock it or your key struggles to turn, you could have a damaged lock cylinder. It will improve security and smooth operation by replacing it. The process is relatively easy and should take about 30 minutes. The only tool you'll require is an screwdriver. To begin you must open your door and look at the edge near the lock cylinder. There should be an elongated screw aligned with the bottom of the cylinder. Remove it using the help of a screwdriver, and store it in a safe location.
You'll have to know the dimensions of your current cylinder to ensure you can locate a suitable replacement. The sizes typically range between 60mm and 110mm. To determine the size of the lock, you will need remove the screw from the faceplate. You may also try to rotate the handle of the lock using the key while the cylinder is still in place to see how much it moves in each position.
Next, you'll need to determine the cylinder's diameter and the length of the cylinder cam. These measurements will ensure that the new lock will fit the door you have. Depending on the type of uPVC door, these measurements can vary. You'll need to pick an alternative cylinder that is the same size or a bit bigger than the one that is currently in use.
After you have the measurements, it is time to take down the old door cylinder. It's an easy task but you need to be careful to do it in a safe manner to avoid damaging your door or frame. You should also make sure the door is propped open or secured in a safe manner so that it won't close between steps.
If you don't want to tackle it yourself, a professional locksmith is a great alternative. They can provide expert advice, flawless execution and peace of mind. They can also assist you to select a safe and secure locking system. However, DIY has its perks such as saving money and gaining new techniques. All you require is patience and the right tools, like a Phillips screwdriver. The process of changing your uPVC lock isn't as daunting as it may seem.
Installing the new lock cylinder
It is essential to follow the correct procedure and make sure you use the correct measurements when replacing a lock at your front door. This will not only stop any future problems, but also ensure your home is more secure and allow you to use keys from both sides of the front door. Before replacing your uPVC lock, you must take measurements of the length overall and of the backset and the cylinder's diameter. These measurements will ensure that the lock cylinder can fit into the uPVC and function properly without any gaps.
The first step is to remove the handle from the door by loosening it with the help of a screwdriver. The next step is to take off the barrel screw holding the cylinder lock. After that, you can remove the lock cylinder that was previously in place by inserting a key into the cylinder and turning it both to the left and the right. If the key is in either of these positions, you will be able to get rid of the cylinder by pulling it out of its slot.
Installing the new cylinder on the front of the door is easy. You can use the same steps you used to remove your old one. However, you must be aware that the new cylinder won't fit into the space where the old one was. This is because the cylinder needs to be aligned properly so that it can be locked and closed using the key. To achieve this, ensure that the cylinder is fitted with an elongated keyway and is centered in its slot.
It isn't difficult to install an entirely new uPVC door lock, but you must be cautious not to damage the door's frames or handles. If you are unsure about your capability to complete this project, you should hire an experienced locksmith who is Checkatrade Approved and has worked with these types of doors. Locksmiths can save you time and money by finishing the job quickly.
Attaching the door handle
There are many reasons you might want to upgrade the lock on your front door. You might have lost a key to your lock, the previous tenant has not returned the keys, or you want to upgrade to the most secure lock. It takes just five minutes to replace the barrel of a lock on an uPVC front door. You'll need a Phillips head screwdriver, a new lock cylinder and an extra key (if you plan to make use of one). Make sure the door is propped open or secured safely so that it won't close during the process.
It is not as difficult as you might imagine to replace the lock mechanism on a uPVC door. It is important to begin by determining the type of lock that you have on your front door and the size you require for the replacement. The majority of modern uPVC doors are equipped with single euro-cylinder locks. However, there are also strip locks and multipoint locks available for older doors. It's much easier to replace your uPVC door lock if you know the brand and model it's.
After replacing the cylinder, you'll need connect the door handle back to it. First, you'll need to loosen the set screw that holds the handle's spindle shaft with a screwdriver or Allen key. This will permit you to remove the handle and expose the shaft of the spindle. If the shaft is threaded, you'll need to loosen it a bit before backing it up using a screwdriver to ensure a proper fit.
Test the lock after you have tightened the screws and the lock cylinder. Check that the key is able to turn easily and fits and that the handle's locking mechanism is functioning correctly. A locksmith can help you if you're not confident making it your own.
It is also important to remember that uPVC door handles and lock mechanisms require regular lubrication to maintain their functions. This is especially true in areas that experience high wear and tears, such as those which are frequently used, closed and locked. A small amount of lubricant will go a long way towards increasing their lifespan and making sure they function properly.
Test the new lock
A upvc lock is an important part of the security of your home. But, just like any other device, it can wear out over time or become compromised. door lock replacement Repair My Windows And Doors to a well-functioning uPVC lock is regular maintenance. This will stop malfunctioning issues from surfacing and compromising the security of your home. This can be achieved by lubricating internal mechanisms each six months with an approved oil. This will keep the lock running smoothly and stop it from rusting or getting damaged.
Aside from the regular fluid, you could also apply a silicon-based spray to loosen the keyway and make it easier to insert the key. This is an easy DIY fix that can save you money in the long in the long. Just be sure not to use WD-40, as it can leave oil residue behind which could cause damage to the lock.
It is important to test the new cylinder after installation before assuming it will function correctly. You can do this by testing the handle both from both sides of the door. You can now put the handles back into place and then re-insert the spindle screws to confirm that everything is in order. Finally, re-insert the screws that secured them and pat yourself on the back for a job well-done!
If you are trying to increase your home's security, a locksmith can install additional features, such as sash jammers or door chains. They can also assist you to choose the best locks for your home. A professional can also assist you in choosing the best lock cylinder size for your doors. This is crucial because a wrong lock could compromise your security.
The cost of replacing the lock of a uPVC lock will vary based upon the type of lock you choose and the number of doors that need to be replaced. The average cost for a professional locksmith is between PS75 and PS100 per hour. However, this price will vary based on where you live and what type of lock you require. Check out locksmith prices before selecting the right company.